Revit MEP Isometric Plumbing Tips and Tricks

[fa icon="calendar'] December 15, 2017 / by Bruce Harris posted in Revit, Revit MEP, Revit Plumbing, Isometric Plumbing

[fa icon="comment"] 0 Comments

Today's Four Minute Friday video shows many tips and tricks to produce a good Plumbing Isometric View. This includes managing the scope of the view, the visibility of other pipe systems, getting vent pipes to display with the correct line type, and controllling the visibility of plumbing fixtures so tags are visible while the fixtures are not.

We start the process in a floor plan view where we have already created and designed the pipes. We will then go into a 3D view where we will walk you through the process to create a good Isometric view.

Check out the video for the best tips and tricks of Revit MEP Isometric Plumbing. 

Read More [fa icon="long-arrow-right"]

How to Create VR Views in Revit For Google Cardboard

[fa icon="calendar'] December 01, 2017 / by Dan Warren posted in Autodesk, Revit

[fa icon="comment"] 0 Comments

In today's video, we're going to teach you how to create VR views from a Revit model. Specifically, we're going to show you how to create a virtual reality view from a Revit model and send it out to a WebGL enabled mobile device so you can view it on a device like Google Cardboard. This is a very low cost way of creating static virtual reality views of your model.

 

 

Read More [fa icon="long-arrow-right"]

How to Manage Revit Grids and Levels in a Multidiscipline Environment

[fa icon="calendar'] November 10, 2017 / by Bruce Harris posted in Autodesk, Revit

[fa icon="comment"] 0 Comments

Today we're going to be discussing how to manage Revit grids and levels in a multi-discipline environment! Now, I'm looking at a floor plan in Revit, and the problem is going to manifest itself in grid lines, as well as if we create any kind of elevation or sectional view, so I'm going to start off by making a section view.

Read More [fa icon="long-arrow-right"]

How to create a KEYPLAN in a Revit Title Block

[fa icon="calendar'] September 01, 2017 / by Bruce Harris posted in Revit

[fa icon="comment"] 0 Comments

This Four minute Friday shows how to create a KEYPLAN in a Revit Title Block. We edit our Title Block, add a sketch and some labels, then create Family Parameters to control their visibility.

Read More [fa icon="long-arrow-right"]

Revit Annotation Tag Units

[fa icon="calendar'] August 04, 2017 / by Patrick Hill posted in Revit

[fa icon="comment"] 0 Comments

Today’s Four Minute Friday show you how you can have different dimensional settings, or units, in your annotation tags when using Revit. This example shows how you can round up the length value in the annotation tag to the nearest 1”.

Read More [fa icon="long-arrow-right"]

Circuiting electrical fixtures in Revit

[fa icon="calendar'] July 21, 2017 / by Bruce Harris posted in Revit

[fa icon="comment"] 0 Comments

In this week's Four Minute Friday you will learn how to create and assign a filter to make it easy to see which electrical fixtures have been circuited and which have not.

Read More [fa icon="long-arrow-right"]

Recent Posts